Skip to product information

Maxi-Cure, 1/2 oz.

U/M: 1/2 oz.



MAXI-CURE extra thick CA is the best CA for most plastics, including GE’s Lexan and plastic model assembly. Its extra thickness makes MAXI-CURE easier to work with for most applications.  When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.


Recommended Uses:

Securing adjustable front axle blocks to chassis.  Apply a drop on the bottom of the axle block and on the area of the chassis where the axle block will be secured.  For additional strength, run a bead of hot glue around the base of the axle block where it meets the chassis AFTER the Maxi-Cure has completely dried.


Plastic model assembly.


Caution:  avoid contact with clear plastic such as windshields


Size:   .5 fl. oz.


Cure Time:  10 - 25 seconds 


Tip:  To prolong the useful life of Maxi-Cure, we strongly recommend refrigerating when not in use.