** WARNING ** - Avoid breathing fumes and vapors. Use only in well-ventilated area. Wear protective gloves and eye protection.
Insta-Cure is a CA (cyanoacrylate - commonly called "super glue") with water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CA's cure, they give off a vapor that can irritate the nose and eyes, so be prepared.
Securing bronze bushings to (plastic) chassis bushing carriers. Apply a drop on top of the bushing being careful to keep the glue between the bushing's outer flanges.
Size: .5 fl. oz.
Cure Time: Approximately 3 seconds
Tip: To prolong the useful life of Insta-Cure, we strongly recommend refrigerating when not in use.