CG Slotcars CGTM12 Tire Machine 1/8" Pulley

CG Slotcars CGTM12 Replacement Pulley for Tire Machine (available for purchase separately).  Aluminum pulley fits over 1/8" axles.

Package contains one (1) pulley.

Tip:  CG Slotcars plans to offer 1/8" double-flanged bushings in the future.  Until then, you can make your own using the following steps:

1. Start with a pair of our SCC 3/32" Double Flange bronze bushings.
2. Use a 3/32" axle to "stack" two (2) bushings one on top of the other.  The axle will ensure the inner bore of both bushings are concentric.
3. With the 3/32" axle still in the bushings, carefully clamp the bushings into a drill vise.  Remove the axle.
4. Use a 1/8" drill bit chucked in the drill press to increase the inner bore from 3/32" to 1/8".