Skip to product information

CG Slotcars CGTM11 Tire Machine 3mm Pulley

U/M: Each

CG Slotcars CGTM11 Replacement Pulley for Tire Machine (available for purchase separately).  Aluminum pulley fits over 3mm axles.

Package contains one (1) pulley.

Tip:  CG Slotcars plans to offer 3mm double-flanged bushings in the future.  Until then, you can make your own using the following steps:

  1. Start with a pair of our SCC 3/32" Double Flange bronze bushings.
  2. Use a 3/32" axle to "stack" two (2) bushings one on top of the other.  The axle will ensure the inner bore of both bushings are concentric.
  3. With the 3/32" axle still in the bushings, carefully clamp the bushings into a drill vise.  Remove the axle.
  4. Use a #31 wire size drill bit chucked in the drill press to increase the inner bore from 3/32" to 3mm.