Slot.It Oreca 07 Replacement Parts
Find stock replacement parts for the Slot.It Oreca 07. The diagrams identify body and anglewinder chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the manufacturer’s CA55A anglewinder configuration. Components can vary between releases; compare your installed parts before ordering. GA1628-LPL is the current matching lightweight-plastic option for the original GA1628-pl gear. The chassis reference is supplied by the manufacturer catalog because the model page omits that hotspot.
Oreca 07 Body Parts Diagram
Oreca 07 Anglewinder Chassis Parts Diagram
Oreca 07 Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH74 |  |
EVO6 LMP anglewinder Boxer/Flat motor mount, 1.0mm offset. | ||
| CH85d |  |
Advanced-blade screw guide, wide braid spacing, revision 2. | ||
| CS55b |  |
Oreca 07 unpainted body kit. | Not Available | |
| CS55p |  |
Oreca 07 spare body parts, including body accessories; compare the set with your car. | Not Available | |
| CS55t-60 |  |
Acura ARX-05 anglewinder chassis, manufacturer reference CS55t-60. | ||
| CS55v |  |
Oreca 07 transparent parts. | Not Available | |
| GA1628-LPL |  |
28-tooth, 16mm lightweight-plastic anglewinder gear; matching current option for original GA1628-pl. | ||
| MN09CH |  |
FLAT-6 20,500 RPM motor, 200 g·cm at 12V; CH case opening. | ||
| PA01-54 |  |
3/32 inch × 54mm solid axle. | ||
| PA25 |  |
Anglewinder axle stopper. | ||
| PA70 |  |
OZ 11-spoke wheel inserts for 17.3mm wheels. | Not Available | |
| PS11 |  |
11-tooth brass sidewinder pinion, 6.5mm diameter. | ||
| PT1152C1 |  |
C1 compound rear slick tires, drawing 1152. | ||
| PT1159C1 | |
C1 compound front slick tires, drawing 1159. | ||
| SP19 |  |
Copper braid, 1 meter. | ||
| SP45 |  |
Motor cable with quick-disconnect connectors. | ||
| W17308225P |  |
17.3 × 8.2mm plastic front wheels, 2.5mm hub. | ||
| W17309715A |  |
17.3 × 9.75mm aluminum rear wheels, 1.5mm hub. |