Caution:
Formerly part number SIPI6512e
Slot.It part number: PI6512E
Alternate part number: SIPI6512E
Specifications
| Specification | Details |
|---|---|
| Brand | Slot.It |
| Manufacturer Part Number | PI6512E |
| Part Type | Pinion gear |
| Number of Teeth | 12 |
| Outside Diameter | 6.5 mm |
| Motor Configuration | Sidewinder, Anglewinder |
| Motor Shaft Diameter | 2.0 mm |
| Material | Ergal |
| Mounting | Press-on |
| Unit of Measure | Each |
Compatibility and Fitment
Slot.It PI6512E Press-on 12T 6.5mm Ergal SW/AW Pinion Gear is designed for use with Slot.It crown sidewinder and anglewinder driven gears. The term "ergal" is a trade name for 7075 aluminum alloy. This pinion gear has 12 teeth (12T), a diameter of 6.5mm and is compatible with motors having a 2mm diameter shaft commonly used by 1/32 slot car racers.
Slot.It 6.5mm pinion gears are generally designed for use with Slot.It sidewinder and anglewinder gears; however, there are always exceptions. For more information about compatible pinion / driven gear combinations and available gear ratios, please click the link below.
- Slot.It pinion gears are designed to be "pressed" onto the motor shaft. They should only be installed / removed using a pinion puller or pinion press designed specifically for that purpose. Using other tools/methods will likely result in a damaged pinion, a damaged motor or both. Our favorite tool for this purpose is a combination puller / press made by Slot.It (see "Related Products" below). Individual pinion pullers and pinion presses are also available.
Match the gear type, diameter, bore and motor-mount configuration to your drivetrain. Check pinion compatibility, gear mesh and clearance before installation.
Package Contents
Package contains one (1) pinion gear.