Slot.It McLaren M8D Replacement Parts
Find stock replacement parts for the Slot.It McLaren M8D. The diagrams identify body and sidewinder chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the CA26e McLaren M8D sidewinder configuration. PA63p is the current manufacturer-listed M8D wheel-insert set, replacing the older PA63 reference. GS1832-LPL is the current compatible 32-tooth, 18mm lightweight-plastic option for the retired original GS1832-pl.
McLaren M8D Body Parts Diagram
McLaren M8D Sidewinder Chassis Parts Diagram
McLaren M8D Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH66 |  |
Clip racing guide, revision B. | ||
| CH67 |  |
Sidewinder EVO6 motor mount, can drive, 0.5mm offset. | ||
| CS26b |  |
McLaren M8D unpainted body kit. | Not Available | |
| CS26p |  |
McLaren M8D spare body parts. | ||
| CS26t-60 |  |
McLaren M8D chassis. | ||
| CS26v |  |
McLaren M8D transparent parts. | ||
| GS1832-LPL |  |
32-tooth, 18mm lightweight-plastic sidewinder spur gear; current compatible option for retired GS1832-pl. | ||
| MX16 |  |
V12/4 23,000 RPM double-shaft motor, 170 g·cm at 12V. | ||
| PA01-48 |  |
3/32 inch × 48mm solid axle. | ||
| PA40 |  |
M2 × 3mm hexagonal set screws. | Not Available | |
| PA63p |  |
Current McLaren M8D wheel inserts for 15.8mm/16.5mm wheels. | ||
| PS11 |  |
11-tooth brass sidewinder pinion, 6.5mm diameter. | ||
| PT1121C1 |  |
Original C1 compound slick tires, drawing 1121; position follows the model diagram. | Not Available | |
| PT1140C1 |  |
C1 compound rear slick tires, drawing 1140. | Not Available | |
| SP19 |  |
Copper braid, 1 meter. | ||
| SP22b |  |
Silicone motor wire, 1 meter. | Not Available | |
| W15808215A |  |
15.8 × 8.2mm aluminum rear wheels, 1.5mm hub. | ||
| W15808215P |  |
15.8 × 8.2mm plastic wheels, 1.5mm hub; position follows the model diagram. |