Slot.It McLaren F1 GTR Replacement Parts
Find stock replacement parts for the Slot.It McLaren F1 GTR. The diagrams identify body and anglewinder chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the manufacturer’s CA10L anglewinder configuration. Components can vary between releases; compare your installed parts before ordering. GA1628-LPL is the current matching lightweight-plastic option for the original GA1628-pl gear. Legacy body, chassis or insert references without a confirmed current catalog successor are retained.
McLaren F1 GTR Body Parts Diagram
McLaren F1 GTR Anglewinder Chassis Parts Diagram
McLaren F1 GTR Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH66 |  |
Clip racing guide, revision B. | ||
| CH74 |  |
EVO6 LMP anglewinder Boxer/Flat motor mount, 1.0mm offset. | ||
| CS10b1 |  |
McLaren F1 GTR unpainted body kit. | Not Available | |
| CS10p |  |
McLaren F1 GTR spare body parts, including body accessories; compare the set with your car. | Not Available | |
| CS10t-60b |  |
McLaren F1 GTR anglewinder chassis, manufacturer reference CS10t-60b. | Not Available | |
| CS10v |  |
McLaren F1 GTR transparent parts. | ||
| GA1628-LPL |  |
28-tooth, 16mm lightweight-plastic anglewinder gear; matching current option for original GA1628-pl. | ||
| MN09CH |  |
FLAT-6 20,500 RPM motor, 200 g·cm at 12V; CH case opening. | ||
| PA01-54 |  |
3/32 inch × 54mm solid axle. | ||
| PA25 |  |
Anglewinder axle stopper. | ||
| PA36 |  |
Original McLaren F1 GTR wheel inserts; current catalog successor unconfirmed. | Not Available | |
| PS11 |  |
11-tooth brass sidewinder pinion, 6.5mm diameter. | ||
| PT1159C1 |  |
C1 compound front slick tires, drawing 1159. | ||
| PT1167C1 | |
C1 compound slick tires, drawing 1167; front/rear position follows the model diagram. | ||
| SP19 |  |
Copper braid, 1 meter. | ||
| SP22b |  |
Silicone motor wire, 1 meter. | Not Available | |
| W17308225P |  |
17.3 × 8.2mm plastic front wheels, 2.5mm hub. | ||
| W17309715A |  |
17.3 × 9.75mm aluminum rear wheels, 1.5mm hub. |