Slot.It Ford GT40 Replacement Parts
Find stock replacement parts for the Slot.It Ford GT40. The diagrams identify body and sidewinder chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the CA18g Ford GT40 sidewinder configuration. CH67 is the motor-mount code printed on the source hotspot image, despite its CH64 filename. The original wheel references are retained as printed. GS1832-LPL is the current compatible 32-tooth, 18mm lightweight-plastic option for the retired original GS1832-pl.
Ford GT40 Body Parts Diagram
Ford GT40 Sidewinder Chassis Parts Diagram
Ford GT40 Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH106 |  |
Motor-mount screws, 2.2 × 4.5mm, with washers. | ||
| CH66 |  |
Clip racing guide, revision B. | ||
| CH67 |  |
Sidewinder EVO6 motor mount, can drive, 0.5mm offset. | ||
| CN06 |  |
Neodymium standard magnet for motor mount. | ||
| CS18b |  |
Ford GT40 unpainted body kit. | Not Available | |
| CS18p |  |
Ford GT40 spare body parts. | ||
| CS18t-60b |  |
Ford GT40/MKII EVO6 chassis, revision 2. | ||
| CS18v |  |
Ford GT40 transparent parts. | ||
| GS1832-LPL |  |
32-tooth, 18mm lightweight-plastic sidewinder spur gear; current compatible option for retired GS1832-pl. | ||
| MX16-m |  |
V12/4 23,000 RPM single-shaft motor, 170 g·cm at 12V. | ||
| PA01-51 |  |
3/32 inch × 51mm solid axle. | ||
| PA40 |  |
M2 × 3mm hexagonal set screws. | Not Available | |
| PA46 |  |
Ford GT40/MKII wheel inserts. | ||
| PS11 |  |
11-tooth brass sidewinder pinion, 6.5mm diameter. | ||
| PT1120C1 |  |
Original C1 compound rear slick tires, drawing 1120. | Not Available | |
| PT1121C1 |  |
Original C1 compound slick tires, drawing 1121; position follows the model diagram. | Not Available | |
| SP19 |  |
Copper braid, 1 meter. | ||
| SP45 |  |
Motor cable with quick-disconnect connectors. | ||
| W15808215P |  |
15.8 × 8.2mm plastic wheels, 1.5mm hub; position follows the model diagram. | ||
| W15808225P |  |
15.8 × 8.2mm plastic front wheels, 2.5mm hub. |