Slot.It Opel Calibra Replacement Parts
Find stock replacement parts for the Slot.It Opel Calibra. The diagrams identify body and inline chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the CA36g Opel Calibra inline configuration with CS36t-60b revision-1 chassis and CH85d screw guide.
Opel Calibra Body Parts Diagram
Opel Calibra Inline Chassis Parts Diagram
Opel Calibra Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH106 |  |
Motor-mount screws, 2.2 × 4.5mm, with washers. | ||
| CH110 |  |
Inline reverse motor mount, 0.5mm offset, without tab. | ||
| CH85d |  |
Advanced-blade screw guide, wide braid spacing, revision 2. | ||
| CN06 |  |
Neodymium standard magnet for motor mount. | ||
| CS36b |  |
Opel Calibra V6 unpainted body kit. | Not Available | |
| CS36p |  |
Opel Calibra V6 body accessories, including rear wing. | ||
| CS36t-60b |  |
Opel Calibra V6 inline chassis, revision 1. | ||
| CS36v |  |
Opel Calibra V6 transparent parts. | ||
| GI28-Bz |  |
28-tooth inline crown gear with bronze hub. | ||
| MX15 |  |
V12/4 21,000 RPM motor, 150 g·cm at 12V. | ||
| PA01-48 |  |
3/32 inch × 48mm solid axle. | ||
| PA40 |  |
M2 × 3mm hexagonal set screws. | Not Available | |
| PA77 |  |
BBS-style wheel inserts for 15.8mm/16.5mm wheels. | Not Available | |
| PI09 |  |
9-tooth brass press-on pinion, 5.5mm diameter. | ||
| PT1228C1 |  |
C1 compound front and rear slick tires, drawing 1228. | Not Available | |
| SP19 |  |
Copper braid, 1 meter. | ||
| SP45 |  |
Motor cable with quick-disconnect connectors. | ||
| W15808215A |  |
15.8 × 8.2mm aluminum rear wheels, 1.5mm hub. | ||
| W15808225P |  |
15.8 × 8.2mm plastic front wheels, 2.5mm hub. |