Slot.It Nissan R89C Replacement Parts
Find stock replacement parts for the Slot.It Nissan R89C. The diagrams identify body and inline chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the CA28h inline configuration with CH110 motor mount and CH85d screw guide. Earlier R89C releases may use different mounts and guides.
Nissan R89C Body Parts Diagram
Nissan R89C Inline Chassis Parts Diagram
Nissan R89C Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH110 |  |
Inline reverse motor mount, 0.5mm offset, without tab. | ||
| CH85d |  |
Advanced-blade screw guide, wide braid spacing, revision 2. | ||
| CN06 |  |
Neodymium standard magnet for motor mount. | ||
| CS28b |  |
Nissan R89C/R90V unpainted body kit, original CS28b version. | Not Available | |
| CS28p |  |
Nissan R89C/R90V tearproof body parts, including rear wing. | ||
| CS28t-60 |  |
Nissan R89C/R90V chassis, EVO6 compatible. | ||
| CS28v |  |
Nissan R89C/R90V transparent parts. | ||
| GI28-Bz |  |
28-tooth inline crown gear with bronze hub. | ||
| MX16 |  |
V12/4 23,000 RPM double-shaft motor, 170 g·cm at 12V. | ||
| PA01-48 |  |
3/32 inch × 48mm solid axle. | ||
| PA40 |  |
M2 × 3mm hexagonal set screws. | Not Available | |
| PA48 |  |
Wheel inserts shown on the original Nissan model reference. | ||
| PI09 |  |
9-tooth brass press-on pinion, 5.5mm diameter. | ||
| PT1159C1 |  |
C1 compound front slick tires, drawing 1159. | ||
| PT1167C1 | |
C1 compound rear slick tires, drawing 1167. | ||
| SP19 |  |
Copper braid, 1 meter. | ||
| SP45 |  |
Motor cable with quick-disconnect connectors. | ||
| W15808215p |  |
15.8 × 8.2mm plastic front wheels, 1.5mm hub. | ||
| W16508215A |  |
16.5 × 8.2mm aluminum rear wheels, short hub. |