Slot.It Mazda 767B Replacement Parts
Find stock replacement parts for the Slot.It Mazda 767B. The diagrams identify body and inline chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the CA60a inline configuration. Body screws are shown at a body-post location; the screws fasten from beneath the chassis.
Mazda 767B Body Parts Diagram
Mazda 767B Inline Chassis Parts Diagram
Mazda 767B Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH106 |  |
Motor-mount screws, 2.2 × 4.5mm, with washers. | ||
| CH110 |  |
Inline reverse motor mount, 0.5mm offset, without tab. | ||
| CH120 |  |
Body-to-chassis screws. | ||
| CH85d |  |
Advanced-blade screw guide, wide braid spacing, revision 2. | ||
| CN06 |  |
Neodymium standard magnet for motor mount. | ||
| CS60b |  |
Mazda 767B unpainted body kit. | Not Available | |
| CS60p |  |
Mazda 767B spare body parts. | ||
| CS60t-60 |  |
Mazda 767B chassis. | ||
| GI28-Bz |  |
28-tooth inline crown gear with bronze hub. | ||
| MX16 |  |
V12/4 23,000 RPM double-shaft motor, 170 g·cm at 12V. | ||
| PA01-51 |  |
3/32 inch × 51mm solid axle. | ||
| PA40 |  |
M2 × 3mm hexagonal set screws. | Not Available | |
| PA87 |  |
Mazda 767B wheel inserts. | Not Available | |
| PI09 |  |
9-tooth brass press-on pinion, 5.5mm diameter. | ||
| PT1159C1 |  |
C1 compound front slick tires, drawing 1159. | ||
| PT1167C1 | |
C1 compound rear slick tires, drawing 1167. | ||
| SP19 |  |
Copper braid, 1 meter. | ||
| SP45 |  |
Motor cable with quick-disconnect connectors. | ||
| W15808225P |  |
15.8 × 8.2mm plastic front wheels, 2.5mm hub. | ||
| W16508215A |  |
16.5 × 8.2mm aluminum rear wheels, short hub. |