Slot.It Alfa Romeo 155 V6Ti Replacement Parts
Find stock replacement parts for the Slot.It Alfa Romeo 155 V6Ti. The diagrams identify body and inline chassis components. Select a linked part number to view its product page, or choose a quantity in the combined table below.
Quantities refer to packages. Parts without a public SCC listing remain shown for reference with disabled purchase controls. Sold-out products remain linked.
This guide follows the CA45c 1996 inline Alfa Romeo 155 V6Ti. The original diagram specifies CS35v glazing, CS40p/CS35p body accessories and CS45t-60 chassis. Earlier 1993–95 releases may use different body and chassis parts. The original CS45b body kit is retained as a reference; no current catalog successor was found.
Alfa Romeo 155 V6Ti Body Parts Diagram
Alfa Romeo 155 V6Ti Inline Chassis Parts Diagram
Alfa Romeo 155 V6Ti Stock Replacement Parts
| Part | Thumbnail | Description | Quantity | Purchase |
|---|---|---|---|---|
| CH106 |  |
Motor-mount screws, 2.2 × 4.5mm, with washers. | ||
| CH110 |  |
Inline reverse motor mount, 0.5mm offset, without tab. | ||
| CH85d |  |
Advanced-blade screw guide, wide braid spacing, revision 2. | ||
| CN06 |  |
Neodymium standard magnet for motor mount. | ||
| CS35p |  |
Alfa Romeo 155 V6Ti body accessories, as specified on CA45c. | ||
| CS35v |  |
Alfa Romeo 155 V6Ti transparent parts, as specified on CA45c. | ||
| CS40p |  |
Alfa Romeo 155 V6Ti 1995/1996 body accessories, including rear wing. | ||
| CS45b |  |
Original Alfa Romeo 155 V6Ti 1996 unpainted body kit; current catalog successor not confirmed. | Not Available | |
| CS45t-60 |  |
Alfa Romeo 155 V6Ti 1996 inline chassis. | ||
| GI28-Bz |  |
28-tooth inline crown gear with bronze hub. | ||
| MX15 |  |
V12/4 21,000 RPM motor, 150 g·cm at 12V. | ||
| PA01-48 |  |
3/32 inch × 48mm solid axle. | ||
| PA40 |  |
M2 × 3mm hexagonal set screws. | Not Available | |
| PA78 |  |
OZ-style wheel inserts for 15.8mm/16.5mm wheels. | Not Available | |
| PI09 |  |
9-tooth brass press-on pinion, 5.5mm diameter. | ||
| PT1228C1 |  |
C1 compound front and rear slick tires, drawing 1228. | Not Available | |
| SP19 |  |
Copper braid, 1 meter. | ||
| SP45 |  |
Motor cable with quick-disconnect connectors. | ||
| W15808215A |  |
15.8 × 8.2mm aluminum rear wheels, 1.5mm hub. | ||
| W15808225P |  |
15.8 × 8.2mm plastic front wheels, 2.5mm hub. |