Choosing NSR Gears
Choose gears that fit your motor layout, shaft and axle, then select the ratio for your track and motor.
Pinion and Driven Gear
The pinion sits on the motor shaft and drives the gear on the rear axle. That driven gear is a spur gear on most NSR anglewinder and sidewinder cars, or a crown gear on inline cars. NSR’s tuning guide calls this topic “Crown / Pinion”; the ratio principles also apply to spur gears.
Which Gear Ratio Should I Choose?
| Change | How to achieve it | NSR’s described effect |
|---|---|---|
| Taller / longer gearing | Fewer driven-gear teeth or more pinion teeth. | Favors top speed and smoother running. |
| Shorter gearing | More driven-gear teeth or fewer pinion teeth. | Favors acceleration and braking. |
NSR bases the choice on track and motor, suggests changing the driven gear as the easier adjustment, and describes the stock ratio as a versatile starting point. These are tuning tendencies, not guaranteed performance gains.
Reading the Ratio
Ratio = driven-gear teeth ÷ pinion teeth. A 31-tooth driven gear with a 13-tooth pinion gives 31 ÷ 13 ≈ 2.38:1. With the same pinion, a 29-tooth gear gives about 2.23:1, which is taller gearing.
NSR’s Suggested Starting Combinations
| Layout / motor | Pinion | Driven gear |
|---|---|---|
| AW — King 21 EVO/3 | 13T | 29T spur |
| AW — Baby King 17 | 13T | 27T spur; both gears plastic in NSR’s example |
| AW — King 19 | 13T | 28T spur |
| SW — Shark 21.5 EVO | 11T | 30T spur |
| SW — Shark 25 | 11T | 32T spur |
| IL — King 21 EVO/3 | 10T | 24T crown |

These examples span multiple models. Confirm compatible gear diameter, tooth form, pinion bore, axle bore and motor-mount configuration using your car’s parts guide. Matching tooth counts alone does not establish compatibility. Check race rules before changing the setup.
Source: NSR Guide for Easy Setup and Tuning Cars, section 4, “Crown / Pinion,” printed pages 7–8. Terminology above distinguishes spur and crown driven gears.