3A3D Duster Parts
Purchase additional parts for the 3A3D Duster Kit. The kit is sold separately; parts ordered here use the Slot Car Corner cart and checkout.
Req’d lists the parts needed for one kit. Quantity selects retail packages. Add All uses two wheel packages and one package for each other linked part. Tires are chosen separately using the links below and are excluded from Add All. Verify lead-wire and ferrule quantities for your build. Paint and finishing supplies are not included.
This kit uses a short-can sidewinder motor. Select Motor, Pinion and Spur Gear below. The table and Add All button use your selections. Recommended choices are shown in bold. Dimmed motor options are unavailable for selection. Changing selections leaves existing cart items in place.
Parts for One Duster Kit
Add the available listed parts needed for one kit with a single click, or use the table below to buy parts individually. Add All uses two wheel packages and one package for each other linked part, including the selected motor, pinion and spur gear. Choose tires separately using the tire links; tires are excluded from Add All. Verify lead-wire and ferrule quantities for your build.
Checking current availability…
Parts already in your cart count toward the one-kit quantities. Repeated clicks only add missing packages. Other cart items remain in place.
Individual Parts for the Duster Kit
| SKU | Req’d | Thumbnail | Item Description | Quantity | Purchase |
|---|---|---|---|---|---|
| BMS1050 | 4 (2 pairs) |  |
BMSlot Works BMS1050 Insert 15.8 x 8.5mm Aluminum Wheels | ||
| Choose / view options | 1 pair | Select a product | Paul Gage 21125 tires | — | Choose tire separately |
| Choose / view options | 1 pair | Select a product | Paul Gage 22125 tires | — | Choose tire separately |
| PA01-54 | 1 Pair |  |
Slot.It PA01-54 Solid Axle, 3/32" x 54mm | ||
| PRD130-22 | 1 |  |
Predator 22,500 RPM Short-Can Motor, Ball Bearing | ||
| SW-10300 | Not specified |  |
SCC 22 AWG Ultra Flexible BARE COPPER Silicone Motor Lead Wire, 10 Feet | ||
| HW-07010 | Not specified |  |
SCC Motor Wire Eyelet | ||
| GS1834 | 1 |  |
Slot.It GS1834 18mm Ergal Sidewinder Gear, 34T | ||
| PS12 | 1 |  |
Slot.It PS12 Press-on Pinion, 12T, Sidewinder, 6.5mm, Brass |
** IMPORTANT ** - Clearance between the "back" of the motor and the rear axle is very minimal. If you plan to use a Predator motor, you shouldn't have a problem. Other brands (e.g. Slot.It, NSR, Piranha) have a slightly larger motor can configuration. If you plan to use one of these brands, the axle may interfere or bind with the can. A potential solutions is to use a Slot.It center turned axle that has a reduced diameter along the center section.