3A3D Charger Late Model Asphalt Parts
Purchase the additional running gear and supplies listed for the 3A3D Charger Late Model Asphalt kit. The kit is sold separately by 3A3D Slot Cars; parts ordered here use the Slot Car Corner cart and checkout.
Req’d shows the amount needed to complete one kit. Quantity selects sellable packages to add to your cart; check each product’s package contents before ordering. These kits use a sidewinder motor configuration. Paint, decals, glue and other finishing supplies are not included in this list.
Select the motor, pinion and spur gear below. The table and Add All button use your selections. Changing selections leaves existing cart items in place.
Recommended selections are shown in bold. Dimmed motor options are not currently available for selection.
Parts for One Charger Late Model Asphalt Kit
Add the available listed parts needed for one kit with a single click, or use the table below to buy parts individually. Two wheel packages and two tire packages are needed; each other listed part needs one sellable package. Braid and motor lead wire are cut to fit.
Checking current availability…
Parts already in your cart count toward the one-kit quantities. Repeated clicks only add missing packages. Other cart items remain in place.
Individual Parts For the Charger Late Model Asphalt Kit
| SKU | Req’d | Thumbnail | Item Description | Quantity | Purchase |
|---|---|---|---|---|---|
| BMS1050 | 4 (2 pairs) |  |
BMSlot Works 15x8mm Insert Wheels | ||
| PGT-22125 | 4 (2 pairs) |  |
Paul Gage PGT-22125 tires | ||
| BMS332-55 | 1 Pair |  |
BMS332-55 3/32" x 55 mm axles | ||
| PRD130-22 | 1 |  |
Predator 22.5K RPM "Jolly Rancher" Ball Bearing Motor | ||
| CB-00100 | 2 pieces |  |
Car braid — copper; cut two pieces to fit | ||
| SW-10300 | 2 lengths |  |
Motor Lead Wire (6" ea.) | ||
| HW-07010 | 2 |  |
SCC Motor Wire Eyelet | ||
| GS1834 | 1 |  |
Slot.It GS1834 18mm Ergal Sidewinder Gear, 34T | ||
| PS12 | 1 |  |
Slot.It 12-tooth 6.5mm Sidewinder Pinion Gear |
** IMPORTANT ** - Clearance between the "back" of the motor and the rear axle is very miminal. If you plan to use a Predator motor, you shouldn't have a problem. Other brands (e.g. Slot.It, NSR, Piranha) have a slightly larger motor can configuration. If you plan to use one of these brands, the axle may interfere or bind with the can. A potential solutions is to use a Slot.It center turned axle that has a reduced diameter along the center section.