3A3D '57 Ford Parts
Purchase the additional running gear and supplies listed for the 3A3D '57 Ford kit. The kit is sold separately by 3A3D Slot Cars; parts ordered here use the Slot Car Corner cart and checkout.
Req’d shows the amount needed to complete one kit. Quantity selects sellable packages to add to your cart; check each product’s package contents before ordering. Select the Motor Configuration to match your 3A3D kit. Paint, decals, glue and other finishing supplies are not included in this list.
Select the motor configuration, motor, pinion and crown gear. The table and Add All button use your selections. Changing selections leaves existing cart items in place.
Recommended selections are shown in bold. Dimmed motor options are not currently available for selection.
Parts for One '57 Ford Kit
Add the available listed parts needed for one kit with a single click, or use the table below to buy parts individually. Two wheel packages and two tire packages are needed; each other linked part needs one sellable package. Add All uses only the motor matching the selected Motor Configuration. Braid and motor lead wire are cut to fit. The unlinked body screws must be sourced separately and are not added by this button.
Checking current availability…
Each Add All click adds the full available quantities for one more kit, including shared parts already in your cart. Adding the same kit again requires confirmation. Emptying your cart resets this check. You can still buy individual parts from the table below.
Individual Parts For the '57 Ford Kit
| SKU | Req’d | Thumbnail | Item Description | Quantity | Purchase |
|---|---|---|---|---|---|
| CBD1100 | 2 pairs |  |
CB Design 15x10 Insert Wheel | ||
| PGT-22166FF | 2 pairs |  |
Paul Gage PGT-22166FF tires | ||
| PA01-51 | 1 Pair |  |
52 MM axles of your choice 3/32 | ||
| M25010-OV | 4 |  |
M2 5mm grub screws (oval point) | ||
| CH106 | 4 |  |
Slot It style pod screws | ||
| — | 3 | — | M2.5x 4MM body screws | — | Not Available |
| MT-0410 | 2 |  |
SCC 4mm motor mount screws | ||
| JKP5574 | 1 pair |  |
JK Products #5574 3/32 single flange bushings | ||
| PRD130-22 | 1 |  |
Predator 22,500 RPM Short-Can Motor, Ball Bearing | ||
| CB-00100 | 2 pieces |
|
Car braid — copper; cut to fit | ||
| SW-10300 | 2 |  |
Motor Lead Wire (6" ea.) | ||
| HW-07010 | 2 |  |
Motor Lead Wire Ferrules | ||
| SILK-BRM | 1 |  |
SlotInvasion Guide | ||
| PI09 | 1 |  |
Slot.It 9-tooth 5.5mm Inline Pinion Gear | ||
| GI27-Bz | 1 |  |
Slot.It 27-tooth Crown Gear |