INSTA-CURE+ is a CA (cyanoacrylate - commonly called "super glue") is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film.
Recommended Uses:
Securing bronze axle bushings to (plastic) chassis bushing carriers where the bushing does not fit snugly in the carrier. Apply a drop to the base of the bushing carrier before installing the bushings (you'll need to work quickly). Apply a drop to the outer bushing flanges where they meet the bushing carrier and a drop on top of the bushing being careful to keep the glue between the bushing's outer flanges.
Size: .5 fl. oz.
Cure Time: 5 - 15 seconds
Tip: To prolong the useful life of Insta-Cure Plus, we strongly recommend refrigerating when not in use.